Rage Pinout
Dave sent me this info:If you don't need audio I/O from the AIW's ports, there is an easy way to get working cables... just take a standard S-Video cable and break off the tiny plastic key tab inside the cable's plug. The pinout/position then matches the ATI port for the video and will fit the output jack. Take a pair of pliers and round-out the small bump in the metal ring to make it fit in the input jack to.
Note:: you can't use one of those svideo <=> composite adapters, the composite pin would be between 7 and 1.
I also found another layout at Google discussion group, either should work, the only difference is the google one labels the individual grounds. Using the correct grounds might make the signals a bit cleaner, but probably won't help much at all.
- Ground Color (C) S-VHS; Ground Luminance (Y) S-VHS
- Ground Video
- Video
- Ground Audio
- Color (C) S-VHS
- Audio (L)
- Audio (R)
- Luminance (Y) S-VHS
Powered By CMSimple.dk